Products: Go Kart Parts and Accessories

Carb Tool English Instructions

1. Remove the throttle slide from the carburetor.

2. Compress the throttle return spring slightly.

3. Insert the Carb Tool over the cable with the dish portion up.

4. Centre the spring in the dish on the top of the tool.

5. Release the tension of the spring and align the head of the attached bolt with the slot in the tool.

6. Release the spring and remove the throttle slide by holding the tool and turning the slide counter clockwise.

7. Hold the smaller disk with the square recess up.

8. Insert the needle with the "e" ring opening towards the slot.

9. Hold the "e" ring down and apply pressure to the needle, forcing the needle off of the retaining ring.

10. Set the retaining ring location on the neelde to its new position.

11. Slide the needle back on to the retaining ring in to its new location.